ide to sata power converter cable

Power Management: Support Support System:: all systems Interface: IDE SATA Model: JP203

Power Management: SupportSupport System:: all systemsInterface: IDE SATAModel: JP203

PATA TO SATA interface card provides HDD, ZIP, LS120, MO, CD-ROM or CD-RW IDE interfaces and other hardware into SERIAL ATA interface, transfer rate can be upgraded to second 1.5GB / S. Through this PATA TO SATA interface card, can the original internal CD-ROM drive or burner and turned into an external device.Product Specifications:1, standard SERIAL ATA specifications, with mass storage devices (depending on the motherboard may be). Can be used in conjunction with various types of machine for easy installation.2, hot-swappable, plug and play.3, transfer rate to 1.5GB / S.4,supports standard ATAPI, ATA/133, ATA/100, ATA/66, ATA/33.EIDE.5, Supports standard IDE storage devices (such as Hard Disk, DVD, DVD-RAM, CD-ROM, CD-RW ...)One 40pin IDE portOne Serial ATA portOne 4pin power connectorConverts Parallel ATA to Serial ATASupports ATA 100/133Compliant with Serial ATA specificationInstallation method:1. Before power off the host computer should be first;2. Open the computer case, the HW-629 board into the computer motherboard IDE IDE Block Block (IDE interface board);3. The power line will be equipped with one end connected to the large spare chassis power supply line, one end of a small board in the HW-629 (white transposon, note the direction can not be reversed);4. To the distribution of the data cable to connect one end of the HW-629 SATA board seat, one end of the SATA devices connected to the SATA interface;5. Connected after the computer boots into the BIOS for device testing, the host computer should be able to correctly identify the connected IDE devices.

ide to sata power converter cable